YSI Vertical Profiler Systems - Manual (Page 48)

YSI Profiler System USER Manual
The Setup screen now appears as shown below. It shows PhoneBase under ComPort_1 in the
left field (see tree diagram on next page). The software will automatically select Modem Type
to be . Click the down arrow to the right of the field to change modems as
appropriate for your system.
Ensure that Communications Enabled is checked. To edit the modems available, click the Edit
Modem Database.... button. Set the Maximum Baud Rate to 9600 and the Extra Response
Time to 5 sec. Click Apply to confirm any changes.
Now, click to highlight PhoneBase in the left field (tree) and click the Add… button just as
before to proceed with your setup.
YSI Environmental 669523 Rev B Page 4-3