Xylem H-2192 - Manual (Page 53)

enough so it does not reset a normal call.
Q - Voice Quality Options:
This option is used to bring up a menu that allows the user to adjust the voice volume, speed, delays
between words, and other voice quality options. See section 5.7.1.
R - Reset Defaults:
This option resets all user programmable options back to the factory defaults.
5.9.1 Voice Quality Menu
This menu allows the user to adjust the voice quality options for their personal preference. Even
though this uses an advanced ‘Text To Speech’ converter, keep in mind there are still limitations on
range and true voice dynamics. Again, all these are changed based on user preference.
H-2191 Advanced Voice Menu (ESC to Exit)
V - Volume (0 to 9 Default = 6):
S - Speed (0 to 9 Default = 1):
D - Delay (0 to 5 Default = 2):
P - Pitch (0 to 9 Default = 5):
F - Freq (0 to 9 Default = 5):
E - Expression (0 to 9 Dflt = 3):
Enter Option ->
V - Volume
This Option sets the voice volume. Going to loud may cause distortion.
S - Speed
This Option sets the voice speed. Some messages are easier to understand at higher speeds while
others are easier at the slower speeds.
D - Delay
This Option sets the delay between words.
P - Pitch
This Option sets the voice pitch.
F - Freq
This Option sets the voice frequency.
E - Expression
This Option sets the voice Expression.
H-219X
Menu Mode Reference 5-13