beautypg.com

H-219x – Xylem H-2192 User Manual

Page 42

background image

5.3 Main Menu

The main menu has a few status lines but is mainly used to move into sub menus that are organized
bases on function.

H-2192 Main Menu (ESC to Exit)

Modem Type = CELL
Battery = 13.22 Volts
Hardware Version = 0
Firmware Version = V1.0

V - Voice Messages Menu
A - Alarm Call Out Menu
R - Radio Menu
M - Cell Modem Menu
D - Diagnostic Menu

Enter Option ->

Modem Type:
The modem type is either a POTS or a Cell type of device. POTS stands for Plain Old Telephone
System and is connected using the standard RJ 11 phone connection. The other type is the Cell
connection. The modem comes from the factory set as a POTS or Cell type and cannot be changed
in the field. This is why there are two different model numbers for the modem. The H-2191 is for
the POTS unit and the H-2192 is the Cell unit.

Battery = XX.XX Volts
This is the battery voltage as measured by the modem. The battery voltage may also be used to see
if the cell phone modem or the radio power should be turned off.

Hardware Version = 0
In time it may be required to update hardware design. The system has the ability to see what version
of hardware is in use and make adjustments based on available options etc.

Firmware Version = 1.00
This option shows the version of the current firmware running in the unit.

V - Voice Messages Menu
This menu is used to enter in all the voice messages.

A - Alarm Call Out Menu
This menu is used to enter the phone numbers to call in case of an alarm. Alarms are also enabled
or disabled in this menu.

5-2 Menu Mode Reference

H-219X

This manual is related to the following products: