Xylem H-2192 - Manual (Page 33)

4.2 General System Commands
Command: MENU
Description: This command is used to start a simple menu interface to aid the user in configuring
the modem. All setup and most diagnostic options are available using the menu
interface. In most cases this built in menu will be used to setup and configure the
modem. The menu makes it easy to make the changes to the different options and
organizes the options in logical menu groups.
Example: avmenu
This will cause the main menu to be displayed.
Command: RESET
Description: This is used to reset the modem to factory defaults.
Command: PCBVERSION
Description: This is used to return the current version of the PCB (printed circuit board) in use.
This will be a number from 0 to 7 with 0 being the first release. As changes to the
hardware (PCB) the number will increase. This is mainly used by the manufacture
when the user calls in for technical assistance.
Example: avpcbversion
PCB Version=0
Command: BATTERY
Description: This command is used to return the battery voltage as measured by the modem.
Example: avbattery
Battery=13.52 Volts
H-219X
Modem Command Reference 4-3