Xylem H-2192 - Manual (Page 35)

Example: avtime=12:15:00
OK
If the command is entered without the time portion, then the last time value entered will
be returned.
Example: avtime
Time=12:45:00
Command: BOX01 - BOX10
Description: These commands are used to send data to the modem, or to see the last value entered
for the selected data box.
In a normal sequence the command AVBOXxx =xx.xx is sent to the modem from the
logger. A separate AVBOXxx command is used for each value sent tot he modem. If
the command was successful then the “OK” message will be returned.
If the command is entered without the data value portion, then the last value entered for
the selected box will be returned.
Command: SHIFTVALUES
Description: This command is used by the data logger to shift the data in the table at scheduled
timed updates.
If the command was successful then the “OK” message will be returned.
Command: VALUES
Description: This command can be used to see all the data that is currently stored in the modem.
This includes the time stamp of when the data was received. The data will be
formatted much like the above table.
H-219X
Modem Command Reference 4-5