Xylem H-2192 - Manual (Page 24)

The Cell phone modem module can be powered up all the time or off all the time. It can be
programmed to turn on and off at set times, or based on the level of the battery voltage. The
following menu is used to select how the power for the cell module is handled.
H-2192 Cell Phone Menu
P - Power On/Off: Off (Manual Off)
Last Time Update: 00:00:00
N - Cell Turn On Time: 06:00:00
F - Cell Turn Off Time: 18:00:00
V - Cell Turn Off Voltage: 12.25
A - Cell Carrier APN: i2gold
U - Cell Carrier Username:
W - Cell Carrier Password:
Current IP Address: 10.11.12.13
I - TCP Listen Port Number: 2192
Enter Option -> _
P - Power On/Off:
This option selects if the cell module is powered on, off or auto. In the auto mode the modem
will power up and down automatically based on the turn on time and turn off time settings.
N - Cell Turn On Time:
This option sets the time the cell phone module will turn on if the power mode is set to ‘Auto’.
F - Cell Turn Off Time:
This option sets the time the cell phone module will turn off if the power mode is set to ‘Auto’.
V - Cell Turn Off Voltage:
This option sets the minimum battery voltage level before the modem module will turn off
automatically. This will turn the modem module on and off no matter what the power mode is
set to. This may be set to 10 to 14 volts. The default is 12.25 volts. This will help prevent the
modem from draining the battery.
A - Cell Carrier APN:
This is a GSM only option and sets the APN used with GSM provider.
U - Cell Carrier Username:
This is a GSM only option and sets the username if required for the GSM provider.
3-8 Operation
H-219X