GE Industrial Solutions AF-300E$ - Manual (Page 115)

9-2
IN-WARRANTY FAILURE CHECKLIST
To assist with warranty troubleshooting, the following information is required. This data is needed to evaluate the cause in an effort to eliminate any
further failures.
Model No.:
Serial No.:
Start-Up Date:
Failure Date:
Status When Failure Occurred (check one):
Power-Up Running Accel Decel
Explanation of Failure
Application Information (check Yes or No)
Input Transformer: Yes No
If Yes: KVA
L1 Volts L2 Volts L3 Volts
Power Factor Correction Capacitors: Yes No
If Yes: Microfarrad
Other Equipment on Same Power Yes No
If Yes, what?
Line Reactor on Input Yes No
Input Starter Yes No
Output Starter Yes No
Motor Overloads Yes No
Control Terminals Used (circle if used)
THR X1 X2 X3 X4 X5 30A 30B 30C
RST BX FWD REV C1 V1 11 12 13
Y1 Y2 Y3 Y4 Y5 AX1 AX2 HLD
Function Codes Different From Factory Settings
Function Code Setting Function Code Setting
Failure Message (see Section 5)
Latest Fault Previous Faults: No Message
Hz 1.
A 2.
V 3.
After all of the Checklist information is acquired, contact the following number for assistance: (540) 387-5739
When returning failed parts, reference the C_ _ _ _# on the shipping documents that came with the
replacement parts and ship failed parts to:
GE Fuji Drives USE, Inc. • Attn: Product Service Dept. • Rm 191 • 1501 Roanoke Boulevard • Salem, VA 24153
(Marked C_ _ _ _ # )