SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 74)

Ethernet Configuration 66
192.137.81.210 00-20-4A-52-4B-19 static
3 Start a TELNET connection to configure the unit:
telnet 192.137.81.210 1
a a
a
This connection (on port 1) will fail in first instance (after 3 seconds,
abort link), but the SG-20 will register the attempt by enabling the Telnet
service on port 9999.
4 Continue with: telnet 192.137.81.210 9999 a
a a
The response must be:
5 Hit a a and you’ll get in the Configuration screen: (if you wait too long,
the connection will fail and you have to disconnect and re-connect).
Proceed at Point 3 above. You may skip steps 3 .. 7 of section 6.4 in
case you run a DHCP service on your network.
6.9 RELATED DOCUMENTS
Discovery User’s Manual Scantech P/N A362001 Version 2.1
Discovery Product Support CD-ROM P/N A362103 Version 2.1
Lantronix CoBox Micro Manual Revision D
http://www.lantronix.com/support/
Reference Cobox Micro.