SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 105)

Scantech-ID Discovery SG-20 97
- S-Record too long.
- Address of the S-Record out of range.
- Write to Flash not successful.
Some notes :
It's up to the host to take the proper actions, when for example the Discovery
doesn't respond in time (Timeout) or when a NACK has been transmitted. E.g.
a number of retries could be performed until a certain limit.
When the Discovery has received an S7, S8 or S9 record, it assumes the
upload action is finished.
An upload action can only be interrupted by a Reset (software or hardware) or
an ESC character.
The Windows driver SG.DLL or SG20.DLL contains a special function to
download your s-rec file, using RS232, RS422 or RS485. The Windows
Discovery TCPIP Terminal also contains an option to upload s-records.