SCANTECH ID (Champtek company) Discovery SG-20 User Manual
Page 65
Scantech-ID Discovery SG-20
57
2.
Hit
a a
and you’ll get in the Configuration screen (if you wait too long, the
connection will fail and you have to disconnect and re-connect).
You may skip steps 3 - 7 if you use DHCP.
3.
Select
a
0
to configure the SG-20/Ethernet terminal
4.
Input the required fixed SG-20 terminal IP address, format:
a
xxx xxx xxx xxx
a
In case 0 0 1 0
(= default setting) is entered, you select
the DHCP feature.
5.
Set Gateway IP Address (N)
a a
6
Netmask: No. of Bits for Host Part (0=default) (08)
a a
7
Change Telnet config password (N)
a
The response must be: