SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 51)

Scantech-ID Discovery SG-20 43
Device: Polaris (=default): A Scantech Polaris barcode
scanner is connected to this port.
Vip-type: Another type Scantech scanner (like Nexus, Pollux or
Castor) is connected to this port.
Auxiliary: Any other RS232 device.
None: This port is entirely ignored.
Port 4:
This port is reserved for a future extension with a smart card reader. Every
parameter, except RTS/CTS, can be altered.
Explanation :
Device : - Chipcard: If a chipcard reader is connected, a special protocol will
be used. This refers to a special chipcard reader, only
available on a project base.
- Auxiliary Any RS232 device.
- None This port is entirely ignored.
Screen 4.0
Enter screen 4.1
Enter screen 4.2
Enter screen 5.0
Back to screen 3.0
Screen 4.1
Select next field
Increase value of current field
Decrease value of current field
Back to screen 4.0