SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 24)

System Integration 16
3.1 UNPACKING
Unpack the Discovery as follows:
1. Take the Discovery and its accessories out of the box.
2. Remove the packing material.
3. Check the packing list to make sure you have received all of the items
ordered.
4. Visually inspect the Discovery and accessories for any evidence of physical
damage.
5. If anything is missing or appears to be damaged, immediately contact your
dealer.
ATTENTION
Store the packing material and boxes: it should be used whenever
the Discovery is transported for servicing.
3.2 MOUNTING
Once you have unpacked all components, you can start installing the Discovery.
Installing the Discovery is divided in two steps:
1. Mounting the Discovery bracket to the wall.
2. Placing the Discovery on the bracket
(and pushing the lockplate to fasten the Discovery on the bracket.)
3. Installation is discussed in detail in the following subsections.
3.2.1 Mounting the bracket to the wall
Mount the bracket of the Discovery as follows: