SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 54)

Ethernet Configuration 46
MFS: 1-10 The MFS station number (Note : this number is NOT
automatically linked to the remote IP Address, which can be
found in the Ethernet settings).
POS Station: 11-240 The station number the Discovery should use. (Note:
this number is NOT automatically linked to the own IP Address,
which can be found in the Ethernet settings).
Country: The country number which should be used by this Discovery.
By default, the following countries are present in flash memory
033 (France)
036 (Hungary)
044 (United Kingdom)
048 (Poland)
353 (Republic of Ireland)
420 (Czech)
421 (Slovak)
5 more reserved countries are present.
Screen 4.2
If chosen 'YES', the Discovery returns to factory default settings 1) .
You can find these settings in Appendix D on page 87.
1
This may differ from the settings of the units at the moment of shipping from the Scantech ID
Factory.