SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 73)

Scantech-ID Discovery SG-20 65
3x: Network controller error
4x: EEPROM checksum error
5x: Duplicated IP address on the network
(non-fatal error)
6x: Software does not match hardware
(non-fatal error)
Red blinking, green (Channel 1) blinking:
4x: Faulty network connection (non-fatal error)
5x: No DHCP response received (non-fatal
error)
4 Network
Link Status
Lights solid green to indicate network port is
connected to the network.
6.8 NON WINDOWS USERS
Below you find a detailed description how to access and configure the
Ethernetwork parameters of the Discovery/TCP-IP in case you do not use MS-
Windows. The semantics may vary slightly per Operating system.
Making Connection
The MAC address of the Discovery is temporarily coupled to a (free) IP address
with ARP, open a terminal and input:
1 a arp -s 192.137.81.210 00-20-4A-52-4B-19 a
2 Check this with ARP -a: arp -a a
a a
the response must be:
Interface: 192.137.81.105 on Interface 0x2000003
Internet Address Physical Address Type
192.137.81.143 00-20-4A-52-4B-19 dynamic