SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 53)

Scantech-ID Discovery SG-20 45
o Suffix = CR
Default fontsize = medium
Display uses only 2 lines of 20 positions.
SG21 : (Only available with special SG21 firmware)
Scrolling messages/images : Disabled
Scrolling messages/images order of appearance :
Scantech default (alternating showing 5 messages and 12 images)
Static Text : Enabled
Barcodes without code identifiers
RS232 settings :
o Echo = off
o Suffix = CRLF
Default fontsize = medium
Disable 'One Moment'
Print mode
o Buffered: The Discovery uses an internal buffer (4 kB) for print
jobs. The print job is executed in the Background.
o Polled: The Discovery waits for the printer to be ready, before
any data is sent to it. This is a locked operation : Not until the
character is printed (or when a timeout occurs) the Discovery
returns to normal operation.
Code Ident.
o On/Off: Enable / Disable code identifiers of the internal
barcode scanner.
Def. font set:
o 1,2,4-9: The default character set which should be used for
internal messages and static texts.
(Note : Sets 4 - 9 are free definable!)
Def.font size:
o small/medium/large. The default character size which should
be used for internal messages and static texts.
The following parameters are visible in SG21 mode only :