Ocean Optics RaySphere 1700 Install - Manual (Page 9)

RAYSPHERE-1700-02-201304 v
About This Manual
Document Purpose and Intended Audience
This document provides you with a detailed description of the RaySphere and RaySphere 1700 systems,
including installation and operating instructions. Quick start instructions are available for users who are
just interested in testing a solar simulator with RaySphere. See
Product-Related Documentation .
What’s New in this Document
This version of the RaySphere Solar Analysis System Installation and Operation Manual updates
specification information .
Document Summary
Chapter Description
Chapter 1: Introduction Contains a description of the RaySphere system.
Chapter 2: Installation and Set-up Provides installation instructions for RaySphere hardware
and software.
Chapter 3: Software Operation Provides software operation instructions for RaySphere.
Chapter 4: File Types and Data Files Provides information on the calibration files, the stray
light correction matrix and the saved file types.
Chapter 5: Operation Contains instructions for operating the RaySphere
system using triggering.
Chapter 6: Using Preconfigured
Configuration Files
Provides information on using preconfigured
configuration files, including how to create them.
Chapter 7: Classifying the Solar Simulator
and Displaying the Results
Provides procedures for using RaySphere with solar
simulators and how to validate your results.
Chapter 8: Test Report Describes a typical test report.
Chapter 9: Nonlinearity Correction and
Calibration
Contains nonlinearity correction and calibration
information as they pertain to RaySphere.
Appendix A: Components Technical Notes Lists technical notes for the RaySphere components.