beautypg.com

Manual triggering – Ocean Optics RaySphere 1700 Install User Manual

Page 39

background image

5: Operation

RAYSPHERE-1700-02-201304

29

► Procedure

To record a spectrum from a triggered pulse,

1.

Press the Setting button (

). The Photocurrent/Trigger Settings dialog box appears.

2. Set the Trigger Source to External. See

Changing Photocurrent and Trigger Settings

for more

information. The chosen parameters for delay are still active. The Photocurrent data will also be
displayed.

3. Press the

button in the Spectrometer tab. A spectrum will be recorded when a trigger pulse

is sent to RaySphere.

Manual Triggering

The software allows you to record a spectrum by pressing the

button in the in the Spectrometer tab.

See also other documents in the category Ocean Optics Equipment: