Ocean Optics RaySphere 1700 Install - Manual (Page 32)

3: Software Operation
22 RAYSPHERE-1700-02-201304
Parameter File
The file parameter.xmls contains fundamental settings and default settings such as names of the
calibration files and default settings for the RaySphere software settings. The parameters (and the
calibration files mentioned in there) are loaded automatically to the software if the RaySphere
software is started.
The settings there can be changed by opening the parameter files as ASCII code.
Stray Light Correction Matrix
The stray light correction matrix is on the CD that comes with your RaySphere system. These files have a
name similar to the following:
Serialnumber_of_the_Spectrometer_Datei _EasyCorr.txt
Do not make any changes to this file.
Saved File Types
The RaySphere software creates several files when data is stored. The files are stored to guarantee the
traceability to the original measured data listed in the created test report and to save the configuration of
the measurement procedure.
The files that are saved are as follows:
• Classification_Date_time_Name.txt. Contains the classification of the solar simulator in a table. An
example is given below:
• Configuration_Date_Time_Name.cfg. Contains all relevant parameters of the measurement. A
detailed description is given in File Types and Data Files .