Usb-hub – Ocean Optics RaySphere 1700 Install User Manual
Page 66
A: Algorithms Used
56
RAYSPHERE-1700-02-201304
• Amplification. Settings for GainX and value of 1 to 10.
• Trigger source
When these parameters are set, the values are saved inside the electronics until the electronics loses
electrical power. To preserve the parameters do not disconnect the USB connection or switch off the
electrical power.
Close the RaySphere software and start the SpectraSuite software. The spectrometers can be operated
now with SpectraSuite and all functions which are provided by SpectraSuite can be used. Set the
spectrometer into Hardware Trigger mode in SpectraSuite to use external triggering or triggering by flash.
See the SpectraSuite Spectrometer Operating Software Installation and Operation Manual for more
information on SpectraSuite (see
USB-Hub
An internal USB hub inside the RaySphere main body controls the communication with trigger
electronics, QE65000 spectrometer and NirQuest512, and bundles the communication into one USB
output that is connected with your computer.