Save config, Photo current/trigger settings tab – Ocean Optics RaySphere 1700 Install User Manual

Page 21

3: Software Operation

RAYSPHERE-1700-02-201304

• Configuration_Date_Time_Name.cfg
• PDcurr_Date_Time_Name.cfg
• Report_Date_Time_Name.pdf
• Spec_merge_Date_Time_Name.txt
• Spec_NR_Date_Time_Name.txt
• Spec_QE_Date_Time_Name.txt
• Spectrum4000-1100_Date_Time_Name.txt

See

File Types and Data Files

for more information.

► Procedure

To save data,

1. Click the Save All icon (

). The Save Data dialog box opens.

2. Select or create the folder where the data is to be saved.

3. Assign a name to the file. It is recommended to use the serial number of the solar simulator or

anything specific which clearly identifies the tested solar simulator.

4. The date and time is added from your computer settings. Ensure that your computer is using the

correct date and time.

Save Config

Save Config (

) saves the actual RaySphere confguration in one file.

Photo Current/Trigger Settings Tab

The Photo Current/ Trigger Settings tab enables you to control the settings for photo current and
triggering of the RaySphere. The maximum sample time for the photocurrent is 160 ms.