Ocean Optics RaySphere 1700 Install User Manual
Page 33
4: File Types and Data Files
RAYSPHERE-1700-02-201304
23
• PDcurr_Date_Time_Name.cfg. Contains the photocurrent data. The first column represents the
photocurrent intensity in arbitrary units. The following three columns have the values true and false
and represent the status information of the RaySphere System. The first value changes from false to
true if the intensity on the PD is higher than the set trigger level. The value true in the second and
third column indicates when a trigger pulse was sent out to the spectrometers. The second column is
for the QE and the third column is for the NirQuest512. The fourth column indicates that the trigger
electronics are working properly.
The data points have an intercept of 87 ms.
• Spec_merge_Date_Time_Name.txt
• Spec_NR_Date_Time_Name.txt and Spec_QE_Date_Time_Name.txt. Contains the raw data of the
spectrum in two columns. The first column represents the wavelength in nm and the second one is the
measured absolute intensity in µW/cm^2/nm.
• Spectrum4000-1100_Date_Time_Name.txt. contains the data point for the spectrum which was
used for solar simulator validation. The two columns represent wavelength in nm and absolute
intensity in µW/cm^2/nm.
• Report_Date_time_Name.pdf. Contains the PDF of the test report measurement data. A detailed
description of the report is in
The Name can be chosen by the user during the save procedure. The date and time are automatically
implemented in the name by the software. Be sure that the date and time in the user’s computer is correct.
All files are in ASCII format.