Ocean Optics RaySphere 1700 Install - Manual (Page 3)

RAYSPHERE-1700-02-201304 i
Important Safety Notices
1. Read the instructions first to avoid any damages.
2. Store your RaySphere system at above -10 °C and below 50 °C to avoid any damages.
3. This is a calibrated measurement device. Handle the system with care. The calibration precision may
be lost if any dust or other pollutant enters the integrating sphere. When the system is not in use, store
it with a dust protector. When removing the dust protector, be sure to keep pollutants from entering
the integrating sphere aperture.
4. Recalibration is recommended after one year of use or sooner is the measurements do not seem to be
accurate. More frequent recalibration may be needed of the RaySphere has suffered any heavy
shocks or is being used in a dusty environment.
5. The RaySphere is heavy. Take care to keep it from falling.
6. If the seal on the screws is broken, then the calibration is no longer valid.
7. To ship the RaySphere, pack it in the Pelican case, which is optimized for transport. Hand carrying if
the RaySphere is recommended for all traveling.
8. Contact your Ocean Optics regional headquarters for questions about RaySphere.
9. Be sure to follow all safety instructions for your solar simulator.
10. Do not cover vents.
11. Do not cover the holes at the top of the RaySphere main body.