Ocean Optics RaySphere 1700 Install - Manual (Page 29)

3: Software Operation
RAYSPHERE-1700-02-201304 19
• The recorded Photocurrent diagram, which shows the time evolution of the flash. The marks indicate
at which times the spectrometer recording began and ended.
For more information, see Classifying the Solar Simulator and Displaying the Results .
Warnings and Status Information
The RaySphere software controls several parameters which might affect the accuracy of the measurement.
The indicators – System, Recording and Measurement – monitor several parameters.
The indicator color changes from green to red if an important parameter is out of range or not acceptable.
Click on the red item to display the warning message. Possible warning messages are listed below:
Message Type Message Meaning
System No spectrometer is connecting No spectrometer is connected to the
RaySphere system
Trigger is not connecting No trigger device is connected to the
RaySphere system
The ID Query failed. Please try again or
unplug and replug the USB device and
Restart RaySphere please. Failure to connect to the trigger device
Failed to read data (error " + error type + ") Failure to read data from the trigger
device