Ocean Optics RaySphere 1700 Install - Manual (Page 22)

3: Software Operation
12 RAYSPHERE-1700-02-201304
Connect Pd
Connect Pd connects RaySphere photocurrent and trigger unit electronics to the computer when the Start
( ) button is pressed.
Icon Meaning
The computer has no connection to RaySphere’s photocurrent and trigger unit.
The computer is connected successfully to the RaySphere electronics.
Sets the system to ready status for taking a measurement.
Disables the ready status to allow changes to photocurrent and trigger settings. See Changing
Photocurrent and Trigger Settings.
Displays the Photocurrent/ Trigger Settings dialog box to allow changes to the photocurrent
and trigger settings.
Changing Photocurrent and Trigger Settings
► Procedure
To change photocurrent and trigger settings,
1. Click the Setting button ( ). The Photocurrent/Trigger Settings dialog box appears.