B&B Electronics ZXT9-RM-KIT - Manual - Manual (Page 55)

Document Number: pnZXTxRM-0712m
Page
55
SP – Cycle Sleep Period: Set/read Cyclic sleep period for cyclic
sleeping remotes. Set SP on Coordinator to match End Device.
Coordinator will discard indirect messages after a period of 2.5*SP, set
Coordinator SP = 0 to send direct messages. Maximum sleep period is
268 seconds (0x68B0).
Range is 0x0 to 0x68B0.
DP
– Disassociated Sleep Period: Set/read sleep period for cyclic
sleeping remotes that are configured for Association but that are not
associated to a Coordinator. Maximum sleep period is 268 seconds
(0x68B0). Range is 0x1 to 0x68B0.
Serial Interfacing: Change modem interfacing options.
Figure 5-34 Serial Interfacing (ZXT24-RM)
BD – Interface Data Rate: Set/read the serial interface baud rate for
communication between modem serial port and host. Request non-
standard baud rates with values above 0x80 using a terminal window.
Read BD register to find actual baud rate achieved. This is a pull down
option. Selections are:
0
– 1200
1 – 2400
2 – 4800
3 – 9600
4 – 19200
5 – 38400
6 – 57600
7 – 115200
RD
– Receive Packetization Timeout: Set/read number of character
times of inter-character delay required before transmission begins. Set
to zero to transmit characters as they arrive instead of buffering them
into one RF packet. The range is 0x0 to 0xFF.