B&B Electronics ZXT9-RM-KIT - Manual - Manual (Page 149)

Document Number: pnZXTxRM-0712m
Page
149
Figure 8-2 RSSI Range Test Results Screen
5. RSSI Range Test Features
Test Results section of the screen shows the total packets sent. The section
also shows the percentage of good packets received back from the modem.
Test Signal Strength checkbox will turn on/off the Signal Strength value
displaying graphically on the progress bar.
The Start button will start the range test as configured. Once the test is running
the button will be shown as Stop.
The list box at the bottom will display all the received packet data both good and
bad. It will display “Timeout waiting for data” for missed packets.
Clear Messages and Statistics button will clear the list box and packet
count/percentages for a clean start to a new test.
The Show Advanced Options check box will toggle the advance test options on
to the screen.