B&B Electronics ZXT9-RM-KIT - Manual - Manual (Page 144)

Document Number: pnZXTxRM-0712m
Page
144
9. On the Advanced Modem Settings Tab, under the Networking and Security
Tab, select the Source Address (MY – Source Address). This sets the
address of the modem and should be comparable with the destination
addresses set above. For example, if you set the destination address on
modem number two to 0002, the source address on modem number one
should be 0002. Another option is to leave the source address at its default
value of FFFF. When the source address is FFFF, the source and
destination address are the same (FFFF). Because this could cause cross
talk between networks, it is recommended that you select a unique source
and destination address as previously described.
10. On the Basic Modem Settings Tab, select 115.2 kbps from the pull down
menu. This should be the same for both radio modems.