Validator action (error action) – Printronix Online Data Validator User Manual
Page 90

Chapter 2
Bar Code Failures
90
For more information on choosing a value for the Number of Codes
parameter, see “Setting Number of Bar Codes on a Form” on
page 59.
Validator Action (Error Action)
The printer response is the same whether the error stems from a
bad or missing bar code. It is determined by the Validator Action
setting in the VALIDATOR menu:
1.
Press
to take the printer offline and place the printer in
Menu mode.
2.
If necessary, press
↓ and
↵
at the same time to unlock the
↵
key.
3.
Press
until VALIDATOR displays.
4.
Press
↓ until Validator Action displays.
5.
Press
+
or
–
to scroll through the choices:
•
Retry Form
(default)
•
Stop & Retry
•
Grade&Report
•
Rescan Form
•
Rescan&Retry
•
Rescan&Stop
•
Stop
•
Overstrike
These options are described in detail below.
6.
Press
↵
to select the desired value.
7.
Press
↓ and
↵
at the same time to lock the
↵
key, then press
PAUSE
to take the printer offline.
8.
Press
PAUSE
again to put the printer online.
..
.
..
.