Install the validator, 8” printer 6” printer 4” printer – Printronix Online Data Validator User Manual
Page 28
Chapter 1
Installation and Removal
28
Install the Validator
Figure 12. Attaching the Validator to the Bracket
1.
Using two 6-32 Phillips head screws, attach the validator to the
bracket as shown in Figure 12.
2.
Use the appropriate holes on the bracket, depending on the
media width.
183339a
8”
Printer
6”
Printer
4”
Printer
Bracket
6-32 Phillips
Screw (2)
Validator