Printronix Online Data Validator - Manual (Page 21)

Install the Ferrite
21
Figure 5. Wrapping the Power/Data Cable Around the Ferrite
8. Using the P10 connector end of the power/data cable, insert
the cable through the ferrite. (Figure 5.)
9. Wrap the power/data cable around the ferrite twice.
10. Adjust the position of the ferrite so that the length from the
ferrite to the DB15 connector is 20 ± 0.5 in ches .
183457a
P10 Connector
(to controller board)
Ferrite
Pencil Line