EVS IPDirector Version 6.2 - June 2013 CONTROL PANEL User Manual - Manual (Page 88)

Operation
User Interface
Button Keyboard
Shortcut
ShuttlePRO key Description
Mark IN Sets an IN point
at the timecode
shown in the
Current
Timecode field
and corresponding
to the bullet
indicator position
on the jog bar.
Then, a green
indicator
represents the IN
point on the jog
bar.
Mark
OUT Sets an OUT
point at the
timecode shown
in the Current
Timecode field
and corresponding
to the bullet
indicator position
on the jog bar.
Then, a red
indicator
represents the
OUT point on the
jog bar.
Clear IN
+
+
Clears the IN
point which has
just been set and
not yet saved.
When applied to a
loaded clip, the
IN point is set to
the Protect IN
timecode, before
the guardband.
78 6. Creating Media
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A