EVS IPDirector Version 6.2 - June 2013 CONTROL PANEL User Manual - Manual (Page 60)

Reganging Channels
To re-gang all the player channels that have been unganged from the Ganged Channels
tab, use the Gang All command.
Available Buttons and Shortcuts
The following table shows the buttons or shortcuts which can be used for the operations:
User Interface Button Keyboard Shortcut
+
+
3.7.4. How to Permanently Remove a Channel
from the Ganged Group
To remove a channel from a group of ganged channels, proceed as follows:
1. Click the Ganged Channels tab to display the list of player channels ganged to the one
currently assigned to the Control Panel.
2. Right-click the player channel to ungang from the list.
A contextual menu is displayed.
3. Select Remove Channel from Group.
The channel is unganged from the others in the Channel Explorer and it disappears from
the list in the Ganged Channels tab.
3.7.5. Synchronizing the Timecode on All Player
Channels
The Sync function is used to synchronize the timecode on all player channels ganged to
the channel currently controlled by the Control Panel.
The Sync function will force all the ganged player channels to synchronize their timecode
position to the same timecode as the current position on the channel controlled.
The following table shows the button, shortcut or ShuttlePRO key which can be used for
the operation:
50 3. Managing Channels
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A