EVS IPDirector Version 6.2 - June 2013 CONTROL PANEL User Manual - Manual (Page 28)

Area Description / See also…
for the list of transport buttons, shortcuts and ShuttlePRO keys.
The E/E, Ret and Snap functions are described in section "Loading
a Train or a Recording Ingest" on page 56.
6. Grab to
File button This button is used to capture an image on the current timecode.
The image is stored as a file in a directory specified in the Settings
(Tools > Settings > Image Capture > Default Path for
Captured Images). See
the General Functions user manual to
know how this path can be set.
2.4.3. Current Timecode Display
Information displayed in the Current Timecode field can be changed as followed:
1. Right-click the Current Timecode field.
The following contextual menu is displayed:
◦ Timecode
◦ Timecode and date
◦ Timecode and date and TC type (LTC or user)
◦ Timecode and TC type
2. Select one of the options.
3. When the TC type is displayed, right-clicking it in the Current Timecode field permits
to shift from one type to the other (LTC or user).
4. When the date is displayed, right-clicking it in the Current Timecode field opens a
calendar to allow a date selection.
2.4.4. Play Mode Button
The Play Mode button is used to define how the loaded item will be played.
Three Play modes exist but all of them are not always available.
Play Mode Description
Normal
Plays the loaded item forward from the IN point to the OUT point,
or from the current timecode.
This mode is available for all the types of loaded items.
Loop
Plays the loaded item in a continuous loop.
This mode is only available for clips and playlists.
Bounce
Plays the loaded item from the IN point to the OUT point, then
from OUT to IN and so on.
This mode is only available for clips.
This button is not displayed in the Software Player as only the normal Play mode is used.
18 2. User Interface
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A