EVS IPDirector Version 6.2 - June 2013 CONTROL PANEL User Manual - Manual (Page 71)

2. This calls up on the screen a list of available recorder channels:
3. By moving the jog dial you can move through the list to highlight the required train.
4. Press Select Train again to select it and exit the menu.
The selected train is loaded on the player channel controlled by the ShuttlePRO.
4.3.8. How to Snap back to the Last Loaded Train
or Recording Ingest
When a record train or a recording ingest is loaded on a player channel or on the Software
Player and then another media is loaded on that channel, the Snap function allows you to
go back to the previously loaded record train or recording ingest at the timecode where the
E/E mode was exited, effectively "snapping" back to where the user left off in the record
train or the recording ingest.
The difference with the E/E function is that the Snap function does not load the train at its
currently recording timecode.
User Interface Button Keyboard Shortcut ShuttlePRO key
+
IPDirector - Version 6.2 - User Manual - Control Panel
4. Loading Media 61