EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 80)

Issue
10.04.A
EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
72
to the Remotes, refer to the section related to the Hypermotion Management in the
XT Tech Ref Software manual.
3.15.4 P
ORT
Possible values: Port #2 to Port #6, Lan PC. Default : Port #6
This parameter specifies on which port (RS422 or Lan PC) the commands must be
sent to the hypermotion camera, and possibly to the PGM if you have selected
‘Hypermotion + LSM” in the Remote Mode parameter.
3.15.5 IP
ADDRESS
Possible values: xxx.xxx.xxx.xxx
This parameter specifies the IP address of the PC LAN in case you have selected
the value ‘Lan PC’ for the Port parameter. If you have selected an RS422 port, the
IP address parameter is not relevant, hence not displayed.
3.15.6 D
IAL
S
PEED
Possible values: 010 X to 1000 X
This parameter specifies by which factor the jog speed will be multiplied.