EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 62)

Issue
10.04.A
EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
54
3.9.4 C
LIP
P
OST
-R
OLL
Possible range: 00s00fr to 30s00fr. Default: 02s00fr.
When the Post-Roll function is enabled from the secondary clip menu, the clip will
play through its OUT point for a duration defined by the Post-Roll parameter. This
is also valid inside record trains if the Record Train OUTs parameter is set to
“Freeze”.
3.9.5 C
ALL
C
HANNEL
VGA
Possible values: Disable (default) / Enable
This parameter disables or enables the Call Channel function on the VGA Clip
screen. This function allows the operator to select on which PGM channel the clips
called from the keyboard/tablet and VGA should be loaded.
3.9.6 C
LIP
E
DIT BY
N
ETWORK
Possible values: Disable (default) / Enable
If this function is enabled, other users on the network can trim, rename, delete,
etc. your clips, or modify the keywords and ranking assigned to your clips. If
disabled, only the local operators can modify or delete clips on the server and edit
their metadata.