EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 40)

Issue
10.04.A
EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
32
2.10 SONY BVW75 SETTINGS (PAGE 7)
Page 7 of the Setup Configuration module allows the administrator to specify the
settings that will be used with the Sony BVW75 protocol.
The following table describes the settings that can be used specifically with the
Sony BVW protocol and the play features of the Edit Rec protocol:
Setting Name Description
FFW/REW Speed Specifies the speeds used by the protocol for forward and
rewind. Possible values rank from 2x to 50x the normal
speed,
Use Guardband Makes the guardband OUT available to the protocol.
When the setting has value ‘No’, the protocol has only
access to the guardband IN.
When the setting has value ‘Yes’, the protocol has access
to the guardbands IN and OUT.
List Remote CAM Allows access to the recorders of the remote server
specified in the XNet field.
When the setting has value ‘No’, the recorders of the local
server are available.
When the setting has value ‘Yes’, the recorders of the local
server and the remote server specified in the XNet field are
available.
XNet Specifies the network number of the remote server that can
be accessed with the protocol.