EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 37)

EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue 10.4.A
29
2.8 HCTX GIGABIT CONNECTION SETTINGS
(PAGE 6)
2.8.1 I
NTRODUCTION
In the Setup Configuration module (SHIFT-F2), press the Page Down key until you
access the page 6. It displays the connection parameters for the HCTX board and
the MTPC board.
From Multicam 9, the servers support a Gigabit Ethernet connection. It allows the
backup of the audio and video data without going through the SDTI network.
The Gigabit connection is provided via the HCTX board. Its backplane is equipped
with two Gigabit Ethernet ports. The settings need to be defined on at least one
port for the server to be able to operate the Ethernet connection.
When the Gigagit module is not present on the HCTX board, the first line of the
HCTX Gigabit connection settings will display the message !Not detected!