EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 12)

Issue
10.04.A
EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
4
Setup page and section
name
Content
Page 5
See section 2.7 ‘RS422
Protocol Settings (Page 5)’,
on page 26.
It includes settings on the VarID used with the
VDCP protocol.
Page 6
See section 2.8 ‘HCTX
Gigabit Connection Settings
(Page 6)’, on page 29
and section 2.9 ‘LAN
Connection Settings (Page
6)’, on page 31.
It includes detailed settings on:
the HCTX gigabit connection
the MTPC board connection
Page 7
See section 2.10 ‘Sony
BVW75 Settings (Page 7)’, on
page 32.
It includes the settings used with the Sony BVW
protocol.
Page 8/9
See section 2.11
‘EditRec Settings (Page 8/9)’,
on page 34.
It includes the settings used with the EditRec
application.
Page 10
See section 2.12 ‘Multiviewer
Settings (Page 10)’, on page
38.
It includes the settings for the connection of an
external multiviewer.
2.1.2 H
OW TO
A
CCESS THE
S
ETUP
C
ONFIGURATION
The Setup Configuration module is available by pressing simultaneously SHIFT-F2
on the keyboard with CAPS LOCK disabled. The Setup Configuration is not
accessible if CAPS LOCK is ON.
2.1.3 H
OW TO
M
OVE
I
NSIDE THE
S
ETUP
C
ONFIGURATION
• Use / SHIFT- to move from one parameter to the next/previous,
and the ←/→ arrow keys to change the value of a parameter.
• Use Page Up / Page Down to access the other configuration screens.