EVS MulticamLSM Version 10.04 - January 2011 Configuration Manual - Manual (Page 73)

EVS Multicam – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue 10.4.A
65
3.12 AUDIO SETTINGS
Audio p.5.1
[F1]Audio slow motion : No
[F2]Lipsync value(ms) : 0
[F3]Audio meters on OSD : Yes
[F4]Audio meters adj.(db): 0
[F5]Aux track output : Prv
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.12.1 A
UDIO
S
LOW
M
OTION
Possible values: No (default) / Yes
Playback or mute the audio track when playing off-speed (speed different than
100%).
3.12.2 L
IPSYNC
V
ALUE
(
MS
)
Range for PAL: From -41,458 ms to 14,708 ms  848 à 3544 (samples)
0 ms  2838
Range for NTSC: from -34,625 to 12,125 ms  688 à 2932 (samples)
0 ms  2350
The Lipsync parameter is the delay (in ms) between video and audio signals. A
positive value means video is ahead of audio. A negative value means audio
ahead of video.
This parameter is also available from the Channel Parameters option of the EVS
Maintenance menu. Changing the Lipsync value in the Setup menu will update it in
the EVS menu and vice versa.
Note
This adjustment is done during the record process. A new Lipsync value
will apply for the next recorded pictures only.
3.12.3 A
UDIO
M
ETERS ON
OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom of each
output monitor.