5 searching the database using the remote panel, Keywords, Ranking – EVS XSense Version 10.04 - January 2011 Operating Manual User Manual

Page 90: Archive

XSense – Version 10.04 – Operating Manual

EVS Broadcast Equipment – January 2011

Issue

10.04.A

10.5 SEARCHING THE DATABASE USING THE

REMOTE PANEL

Keywords and ranking assigned to clips can be used to search the clips database.

When the current element on the primary channel is a record train, the Search
function is directly available from the C position in the secondary menu. To call it,
press MENU to enter the secondary train menu, then press once the C key.
When the current element on the primary channel is a clip, the Search function is
still available from the same location, but it is “hidden” behind the Name function.
To call it in this case, press MENU to enter the secondary clip menu, then press
twice the C key.

In both cases, the LCD display becomes (in LIST mode):

Keywords

They can be selected for use as search criteria the same way they were selected
to be assigned to a clip, in LIST or NUMERIC mode. Up to 3 keywords can be
selected as search criteria. If all 3 keywords locations are used, some of them
must be cleared before selecting a new keyword. Press CLEAR + F1 / F2 / F3 to

clear to corresponding keyword location.

Ranking

A ranking can also be used as the only search criteria, or can be combined to the
keywords as an additional criterion. Press the B key several times to select the
desired ranking.
The RESET key (SHIFT+A) can be used at any time to clear all 3 keyword
locations and reset the ranking to the lowest level.

Archive

This field allows selecting archive status for search criteria.

Parameter

On the Remote

None (default)