EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 83)

Issue
10.04.A XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
74
10.3.2 S
EARCH
C
RITERIA AND
S
EARCH
O
PTIONS
S
EARCH
C
RITERIA
Different criteria can be combined to search the database. They can be defined in
the Search Criteria available at the bottom of the screen.
When you access the Search screen, the criteria that were last defined are still
available on the screen.
Note
If the red cursor is located on another field in the Search Criteria area,
use the ←/→ arrow keys to move from one field to the previous or next
one, until the red cursor is positioned on the requested field.
Criteria Description
Timecode This restricts the search to the clips containing the timecode
specified in this field. The timecode search is not applied on
growing clips.
To define a timecode, type the desired value when the red text
cursor is visible in that field.
The <BACKSPACE> key can be used to clear the last digit
entered.
Date from / to This restricts the search to clips created between these 2 dates
specified in these fields.
If only Date to field is defined, all clips created before that date
will be considered.
If only Date from field is defined, all clips created after that date
will be considered.
The <BACKSPACE> key can be used to clear the last digit
entered. Press the <TAB> key again to move the cursor back to
the keywords list.
Level /
Ranking This restricts the search to the clips with a ranking equal or
higher to the ranking defined in that screen.
Press the ←/→ arrow keys until reaching the desired ranking,
and press ENTER. The selected ranking is highlighted in green.
Press the <TAB> key again to move the cursor back to the
keywords list.
Keywords This restricts the search to the clips containing all keywords
defined in this screen.
To assign a keyword, move the cursor to the desired keyword
and press ENTER, or click on the keyword using the stylus.
A maximum of 3 keywords can be used as search criteria. If all 3
keyword locations are already occupied, the operator needs to