EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 80)

XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
71
10.2.2 H
OW TO
A
SSIGN A
K
EYWORD TO A
C
LIP
Move the cursor to the desired keyword and press ENTER, or click on the keyword
with the stylus. The keyword will be assigned to the first available keyword
location on the last line of the screen. Repeat this to assign more keywords (up to
3) to the current clip.
Depending on the CLIP/CAM mode, the keywords will be assigned to the current
camera angle only (CAM mode), or to all camera angles of the current clip (CLIP
mode).
If 3 keywords are already assigned to the clip, the operator has to clear some of
them to be able to assign new keywords.
10.2.3 H
OW TO
C
LEAR A
K
EYWORD WITH THE
K
EYBOARD
Press to move the arrow cursor to the lower area of the screen. Red
arrows will appear around one of the keywords or ranking values. Use the ←/→
arrows to select the keyword to remove, and press CTRL+DEL. Press the
key again to move the arrow cursor back to the keywords list.
10.2.4 H
OW TO
C
LEAR A
K
EYWORD WITH THE
S
TYLUS
Click on the keyword to remove on the last line, the click on the CTRL+DEL:CLR
KWD area on the screen, or press CTRL+DEL.
10.2.5 H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
K
EYBOARD
Press the key to move the cursor to the lower area of the screen Use the
←/→ arrows to select the desired ranking, and press ENTER. The selected
ranking is highlighted in green.
10.2.6 H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
S
TYLUS
Click on the desired ranking, it becomes highlighted in green.