11 copying playlists, 1 introduction, 2 copy options – EVS XSense Version 10.04 - January 2011 Operating Manual User Manual
Page 112: Edl only or edl+clips copy, Long or short copy, Copying playlists, Edl+c
XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
103
11.11 COPYING PLAYLISTS
11.11.1 I
NTRODUCTION
From the VGA Clip screen, you can perform cut, copy and paste actions with
playlists, in the same way as you do with clips. For more information on these
actions, refer to the section 9.3.13 ‘Moving and Copying Clips’, on page 57.
From the Remote Panel, you can only copy a playlist, but not move (cut & paste) it
to another location.
11.11.2 C
OPY
O
PTIONS
When you copy a distant playlist from the VGA, or a local/distant playlist from the
Remote Panel to the local EVS server, you have different options:
EDL
ONLY OR
EDL+C
LIPS COPY
•
The EDL copy copies only the playlist definition, and the playlist elements
themselves remain at the original location.
•
The EDL + Clips copy copies the playlist definition and the playlist elements to
the server on which the copy is requested.
L
ONG OR SHORT COPY
When you copy the material of the playlist elements, you can perform a long or
short copy:
•
The short copy copies the material between the IN and OUT points of the
playlist elements, with clip guardbands as defined on the destination system.
•
The long copy copies the original clips, not only the material defined as the
playlist element. This makes a difference when the playlist element has been
trimmed compared to the original clip.