EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 134)

XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
125
H
OW TO
P
ERFORM A
V
IDEO
S
PLIT
When you perform a video split, you specify the TC for the beginning or end of the
video transition.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight A Base (SHIFT+B)
4. Press to highlight V SPLIT (D)
5. Jog to the point where you want to set your transition
6. Do one of the following:
o Mark an OUT point if you do a video delay.
o Mark an IN point if you do a video advance.
The value entered will be present on the PRV SCREEN when the clip is next to
play in a playlist.
‘IN’ K
EY
C
OLORS IN
P
LAYLIST
M
ODE
When the Playlist is sitting on the Video and Audio IN point of a Clip, the IN key
will light RED.
When the Playlist is sitting on the Video IN point of a Clip, the IN key will also
light RED.
When the Playlist is sitting on the Audio IN point of a Clip, the IN key will FLASH
RED.
If the Playlist is in a position where the Audio and Video are synchronous, the
IN/OUT keys will be GREEN.
If the Playlist is in a position where the Audio and Video IN points have been split,
the IN key will FLASH GREEN.
‘OUT’ K
EY
C
OLORS IN
P
LAYLIST
M
ODE
When the Playlist is sitting on the Video and Audio OUT point of a Clip, the OUT
key will light RED.
When the Playlist is sitting on the Video OUT point of a Clip, the OUT key will
light GREEN.
When the Playlist is sitting on the Audio OUT point of a Clip, the OUT key will
FLASH RED.
If the Playlist is in a position where the Audio and Video are synchronous, the
IN/OUT keys will be GREEN.
If the Playlist is in a position where the Audio and Video OUT points have been
split, the OUT key will FLASH GREEN.