4 how to insert clips into a playlist, How to insert clips into a playlist, How to insert the result of a clip search into a – EVS XSense Version 10.04 - January 2011 Operating Manual User Manual
Page 108: Playlist’, on, Ow to, Nsert, Lips into a, Laylist, Nsert the, Esult of a
XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
99
11.10.4 H
OW TO
I
NSERT
C
LIPS INTO A
P
LAYLIST
The following rules apply to the procedure below:
•
You need to be in PGM/PRV mode to be able to use the TAKE key on the
Remote Panel to insert a clip.
•
Depending on what is selected in the Setup menu, on page 4.1 - Insert in
Playlist setting (F5), the clip will be inserted before or after this selected
position.
To insert a clip into a playlist, proceed as follows:
1.
Using the Playlist Edit mode or the Browse mode, scroll to the location
where the clip must be inserted.
2.
Call the selected clip. It appears on the PRV output.
3.
Do one of the following to insert the selected clip in the playlist, at the
position shown on the PGM output:
•
Press the A key (INSERT function) on the Remote Panel
•
Press the TAKE key on the Remote Panel
•
Press the SHIFT+INSERT keys on the Remote Panel
A confirmation message will appear if that option has been enabled in the Setup
menu.
After the clip has been inserted, you can press PLST to return to the playlist at
the current position.
11.10.5 H
OW TO
I
NSERT THE
R
ESULT OF A
C
LIP
S
EARCH INTO A
P
LAYLIST
In Playlist Edit mode with a PRV channel, when PRV CTL is enabled, the operator
has full control of the PRV channel while the playlist remains loaded on the PGM
channel.
On the PRV channel, he can perform all clip-related functions, including database
search using timecode, keywords and ranking, from the VGA Search Screen as
well as from the secondary clip menu of the Remote Panel.
Once the desired clip(s) are found, they can easily be inserted in the playlist that
is still loaded on the PGM output. By switching PRV CTRL ON or OFF, the
operator can very easily combine playlist editing and database search functions.
To insert one or more clips from a search result at the end of the current playlist,
proceed as follows:
1.
From the main menu, activate the current playlist as explained in the section
11.4.2 ‘How to Activate a Local or Distant Playlist’, on page 88.