AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 84)

Line Keys and Programmable Keys
78
41-001376-00 Rev 01 – 06.2013
Speeddial/Xfer Key
The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key
allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the Speed
Dial and Xfer key's functionality together allowing the user to transfer calls or use Speed Dial with one key.
Speeddial/Xfer Key Requirements and Functionality
The Speeddial/Xfer key has the following capabilities:
• Speeddial/Xfer and Speed Dial
When the phone is in the “Idle” state, pressing the Speeddial/Xfer key causes the phone to go offhook and dial the
predefined extension.
• Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call to the predefined tar-
get.
If transferring a call fails, a message “Transfer Failed” displays, and you can reconnect the call (get the call back) by
pressing the line key again.
• Speeddial/Xfer and Call Forward
When the phone is in the “Ringing” state, pressing the Speeddial/Xfer key forwards the call to the predefined exten-
sion.
Note:
It is recommended that you enable the “Switch UI Focus to Ringing Line” parameter when using the Speeddial/Xfer fea-
ture. For more information about this parameter, see
“Switch UI Focus to Ringing Line” on page 144 .