AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 78)

Line Keys and Programmable Keys
72
41-001376-00 Rev 01 – 06.2013
Park/Pickup Keys
The 6730i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ servers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable "Park" key to park the call.
• After the call is parked, you can press the "Pickup" key, followed by the applicable value to pickup the call.
Administrators can configure the park and pickup keys for any line using the configuration files or the Aastra Web UI.
Users can make changes to customize the label of the park/pick up keys using the Web UI.
Configuring Park/Pickup Keys
Use the following procedure to configure park/pickup on the 6730i phone:
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1. Click on Operation ->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3. In the "Type" field, select Park.
Note:
The” Value” and “Line” fields are configured by the Administrator.
4. Select from "Key 1" through "Key 8".
5. In the "Type" field, select Pickup.
6. Click Save Settings.
7. Click on Reset, then click Restart to restart the IP phone and apply the changes.