AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 80)

Line Keys and Programmable Keys
74
41-001376-00 Rev 01 – 06.2013
Last Call Return (lcr) Key
(for Sylantro Servers)
Using the Aastra Web UI, you can configure the "Last call return" (lcr) function on a key. This feature is for Sylantro servers
only.
How it works
If you configure "lcr" on a key, and a call comes into your phone, after you are finished with the call and hang up, you can
press the key configured for “lcr” and the phone dials the last call you received. When you configure an “lcr” key, the label
“LCR” displays next to that key on the IP phone. When the Sylantro server detects an “lcr” request, it translates this
request and routes the call to the last caller.
Configuring a Last Call Return Key
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3. In the "Type" field, select Last Call Return.
4. In the "Line" field, select the line to apply this feature.
Valid values are 1 through 6.
5. Click Save Settings.