AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 107)

Handling Calls
41-001376-00 Rev 01 – 06.2013
101
Completing a Transfer to a Contact in Phone Directory
Users can complete a blind transfer to a contact in their local directory. If a user is in a call and initiates a transfer, they can
navigate to the Directory screen and press the Transfer key again to trigger a blind transfer. There is no change to start a
consultative call.
To Transfer a Call to a Contact in the Phone Directory:
Indication of Transferred Calls
When you transfer an active call, the near-end phone displays a Call Transferred screen when a call is transferred and the
far-end call is dropped. The following is the Call Transferred screen on the 6730i phone:
The following procedure describes how to handle the Call Transferred screen on your phone.
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the Transfer key . You should hear a dial tone as a second line opens up.
3. Press the Directory key and select a contact.
4. To complete a blind transfer, press the Transfer key again before the receiving end answers.
To complete a consultative transfer, press Dial to call the contact. Remain on the line to speak with Party
2 before pressing the Transfer key again to transfer Party 1 to Party 2.
To cancel the transfer, select Cancel on the display screen or press the Goodbye key.
IP Phone UI
1. Press the Goodbye key.
The Call Transferred screen no longer displays.
or
Select any Line key.
The Call Transferred screen no longer displays and is replaced by a dial screen.
Call Transferred :